Interior detailing

Matic

New Member
Joined
Feb 20, 2017
Messages
14
Hey guys;

Since i wrapped / painted almost every interior detail part, ill upload some pics here.

Any questions? just ask :)

Vent trims:
Pull out the entire vent unit, then on the inside of the unit you can press the clips to release the detail trim.
DO NOT pull out the trim, it will get broken!

Dash trims:
Just pull em out towards you! easy stuff here!

E-brake trim:
Pull upwards, easy part.

Silver trim around the shifter:
this part is screwed on from the inside of the center console part underneath.
remove the screws underneath the E-brake trim.
I believe there are a few others somewhere in the cup holder (i think, its been a while)
Anyways, when you should be able to remove the center console part to unscrew the trim piece.
Dont shoot me if im wrong, its been a while since i did it.

Shifter, chrome trims, silver trim and "gearbag".
To remove the leather gear"bag" you need to remove the shifter.
Pull down the chrome trim right underneat the shiftknob.. it requires some force the first time.
You should see a small lock pin (clip) then, so remove that, then you can pull out the entire shiftknob.
You can now also work your way to the gear"bag".

Doorpanels:
For the doorpanels, its impossible to remove the silver "stripe".
Painting this is a B****.
Pull off the door panel, and unscrew the doorhandle part.
unplug all cables inside.
Now you can unscrew and remove the silver panel with window puttons.
Mask off the car and all part to paint the doorhandle.


Any questions? Ill try my best to help.

Pictures in attachment
 

Attachments

Roeland van Staeyen

New Member
Joined
Oct 26, 2020
Messages
2
Vehicle(s)
Subaru Levorg GT-S 2017
Hey Matic, how did you paint the trim around the shift boot and the shift knob? Do you have to remove it or do you use masking tape?
 
Top