Stumpvold's Levorg

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
IMG_20170927_180221_500.jpg
Everything is pretty much up and running now, although I'm missing some parts. Does look like it HAS to wait untill after winter, since the snow will arrive before all the parts.
IMG_20170926_195529_580.jpg
I think a new shifter boot is needed. ;)

Heads up, would not recomend anyone ordering from the place I ordered from, since it's been around 3,5 months since ordering it now. Atleast wouldn't order og you are in a hurry.
 

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
Got stance?
IMG_20171018_162652_665.jpg

Side profile, could lower it more, but tires needs slimming down first
-IMG_20171018_172424..jpg
 
Last edited:

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
Car wash :cool:
IMG_20171022_153113_529.jpg
The bag setup works almost flawlessly. I only have a small issue with the rear bags not going to the same hight when filling them with the same pressure. Sometimes the pressure is set to 60 - 65 front - rear, other times it's 60 - 80 front - rear. I'm guessing this could be fixed with hight sensors.
IMG_20171022_180406_906.jpg
"Need" some new parts now :rolleyes:
 

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
Ready for winter :cool:
IMG_20171025_181722_310.jpg
Already looking forward for summer and summertires. Had to stop yesterday because I thought my wheels were falling off! I think I'm too used to the larger and stiffer summer wheels :D
 

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
Got a little bit of snow today, and I'm pleased to say that the understeer problem is cured. It's more tail happy now, and the nose of the car isn't all over the place.
The air setup seems to handle the cold really well. Rear bags are a bit moody sometimes, but only after being aired out over night.
 
Last edited:

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
Small trip to Lillehammer, the air suspension gave me extra ground clearance up the mountains, made the drive on the snowy roads fun.
IMG_20171125_143152_533.jpg
...and parking low is always awesome :cool:
 

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
Offroad mode :cool:
IMG_20171126_193950_443-1152x864.jpg
This about 85-90% of max height, rear go a bit higher than the front, but it will be adjusted eventually. Going 2cm lower on the rear and 1cm on the front to bring the fenders closer to the rims.
 

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
Mandatory parkinghouse shot.
IMG_20171208_235141-2202x1652.jpg

I'm already looking forward to summer, planing to do some small changes to her next season :D

Anyone have some sideskirt's they wan't to get rid of?
 
Last edited:

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
Lowered it about an inch more in the rear yesterday. Front's Next! ;)
IMG_20171228_092737_109.jpg
Rear won't go any lower, atleast without removing the locking nuts for the struts, even then it would only make a 5-10 mm difference.
Front has lots og adjustment left, but I think I'll try with 1-2 cm first. :D
 

rick_poprkt

New Member
Joined
Dec 4, 2017
Messages
3
Location
Melbourne, AU
Did something.View attachment 362
I'm pleased by the result. :D
Great job! This looks so much better than stock.

My apologies if this is a silly question but how do you remove the silver center cover? I hate the silver and have been wanting wrap/paint this and shifter bezel but can't find any info online.
I'm sure I could work it but I don't want to break anything by not knowing where to pull and pry...
 

Stumpvold

Active Member
Joined
Jan 14, 2017
Messages
142
Location
Norway
Great job! This looks so much better than stock.

My apologies if this is a silly question but how do you remove the silver center cover? I hate the silver and have been wanting wrap/paint this and shifter bezel but can't find any info online.
I'm sure I could work it but I don't want to break anything by not knowing where to pull and pry...
You have to take out most of the console. Can't remember if you can remove everything by removing the two screws underneath the silver e-brake cover (just pull this straight up) or if you need to take out the armrest too.. (two screws, one on each side under some plastic covers).
Not that hard, takes a couple of minutes.
 
Top