igtshooter
New Member
- Joined
- Jul 19, 2023
- Messages
- 1
- Vehicle(s)
- Levorg 2.0 GT CVT
I'm fitting an electronic exhaust to a 2020 UK levorg 2.0 GT and am unable to find the CANbus wires to tap into them. I'm looking for a pair of twisted wires, with 2.5volts on one (Low) and 3.5volts on the other (High). It seems the majority of the wiring is twisted. I've tested all of the cables at the rear, around the fuel pump, around the glove box. The ODB2 Canbus pins, 6 and 14 do not output thr expected voltages. Does anyone have any ideas where to look or what colours the Canbus wires use. Many thanks...