2014 Specific Stereo Fascia/Surround

petermac

New Member
Joined
Oct 3, 2021
Messages
1
Vehicle(s)
2014 JDM 2.0 GTS Levorg
Hey all, can anyone recommend a site for the stereo fascia panels?, to replace OEM setup and effectively delete the side buttons? I just got a Levorg and can’t find any 2014 fascia’s online. All are 2015+ and they have a different (3 dial) design, so won’t work. The ‘14 has a button block in the middle. Can’t find one anywhere!!
Thanks, from NZ
 

Rgkendall

New Member
Joined
Feb 2, 2022
Messages
4
Vehicle(s)
2015 levorg
Hey Peter. I just purchased a levorg and finding the same issue. Did you find the right fascia? My levorg is a 2015 but has the same button cluster you talk about.16440998918375778174865547514367.jpg
 

Rgkendall

New Member
Joined
Feb 2, 2022
Messages
4
Vehicle(s)
2015 levorg
I just put in a stereo this weekend. Normal wiring harness' and figured out out steering and reverse camera. Fits in the slot left by oem one. Only thing is the buttons on the side but not highly visible with no power to them. Will have to settle for that till a fascia comes about.
 

robo498

Active Member
Joined
Sep 19, 2020
Messages
499
Location
Melbourne Australia
Vehicle(s)
My17
I just put in a stereo this weekend. Normal wiring harness' and figured out out steering and reverse camera. Fits in the slot left by oem one. Only thing is the buttons on the side but not highly visible with no power to them. Will have to settle for that till a fascia comes about.
Photos please?
 

cw554

New Member
Joined
Oct 7, 2022
Messages
1
Vehicle(s)
2014 Levorg GT-S 2.0l
Hi guys, I have the same set up. I’m looking to replace the factory radio with a Sony CarPlay unit I have. What harness did you guys use?
I’ve pulled out the Panasonic unit and it’s bit of a birds nest behind there.
Cheers
 

Robsyuk

Active Member
Joined
Jun 4, 2022
Messages
376
Vehicle(s)
LEVORG Sti
Idoing told me I needed to replace my surround on my 2018 levorg. They sent me a link which may have it all blanked off - I've lost the link but have a look on AliExpress for levorg radio facia
 

roxanne.phillips

New Member
Joined
Dec 9, 2022
Messages
1
Vehicle(s)
2015 Subaru Levorg 2.0l turbo
I just put in a stereo this weekend. Normal wiring harness' and figured out out steering and reverse camera. Fits in the slot left by oem one. Only thing is the buttons on the side but not highly visible with no power to them. Will have to settle for that till a fascia comes about.
Hi guys, I have the same set up. I’m looking to replace the factory radio with a Sony CarPlay unit I have. What harness did you guys use?
I’ve pulled out the Panasonic unit and it’s bit of a birds nest behind there.
Cheers
Hey did you figure out which harness to use? And did you need any adaptors? We are looking into putting a Kenwood one in my 2015 Levorg. Not too worried about the fascia as from the OP’s images it looks fine to me.
 

lerroy

Active Member
Joined
Jun 27, 2023
Messages
170
Location
Wanaka NZ
Vehicle(s)
VMG (A) Levorg
Anyone ever found the right Fascia? Same problem here!
only way i could fix was to swap to the three rotary dial climate controls, its a straight swap plugs are the same

I bought from beforward Iapan but depending on your location try wreckers. Impreza controls will also fit

opens up more options
 

tom397

New Member
Joined
Jun 1, 2024
Messages
9
Location
NZ, Auckland
Vehicle(s)
2.0 Levorg 2015
only way i could fix was to swap to the three rotary dial climate controls, its a straight swap plugs are the same

I bought from beforward Iapan but depending on your location try wreckers. Impreza controls will also fit

opens up more options
Thats awesome to know, I was wondering if you could swap them. Appreciate the reply mate!
 

miggi747

New Member
Joined
May 5, 2024
Messages
26
Location
Christchurch, New Zealand
Vehicle(s)
Subaru Levorg VM4
I just fitted a Kenwood HU to my vehicle and honestly, the old fascia from Panasonic doesn't look bad. I do plan on going the WRX/Impreza route but for now, this will do. I would've wanted the screen to be flush with the fascia but the head unit has a short body and not enough screws. 1000033770.jpg
 

tom397

New Member
Joined
Jun 1, 2024
Messages
9
Location
NZ, Auckland
Vehicle(s)
2.0 Levorg 2015
By the way, QCA from Christchurch is selling this type of fascia. Is this the one people are looking for?

View attachment 2155
Not quite, looking for one that matches the climate controls in your pic.

Im thinking now ill get the updated climate controls from a wrecker and install along with an Idoing headunit.
 

miggi747

New Member
Joined
May 5, 2024
Messages
26
Location
Christchurch, New Zealand
Vehicle(s)
Subaru Levorg VM4
Not quite, looking for one that matches the climate controls in your pic.

Im thinking now ill get the updated climate controls from a wrecker and install along with an Idoing headunit.
I see. Be Forward Japan has lots so maybe you can start from there. But I'm not a fan of the JDM Levorg's HVAC controls anyway so I am planning on a WRX/Impreza conversion once I free up some funds. The AC mode button on my car also sticks so I do want to replace it at some point.
 

Spunkmeyer

New Member
Joined
Jul 2, 2024
Messages
8
Vehicle(s)
Levorg STI
In the same position. BeForward explained I need to use the HVAC unit numbered 72311VA170 which narrowed my search and Subaru priced this at £400+ vat special order, so that’s a no-go. Has anyone plugged another one in from the forester or wrx HVAC that they know worked plug n play? Can you share the part number?
There’s plenty on eBay but the codes vary. I noted on some that the dials are reversed (eg windscreen heater on the right side not the left side) assume that matters for plug alignment
Once I get the HVAC part nailed I can go ahead and buy the idoing unit.
 
Last edited:
Top