1.6L downpipe VS 2L
- Thread starter PBMS
- Start date
nicodache
Active Member
Is this something to fit somewhere between the engine and the catalytic converter ? if yes, don't even try - the 2.0 has no turbo, the 1.6 does. you'd be trying to fit some N/A pipe to a turbo car, where the turbo is in between the engine and that pipe. Highly unlikely it'd fit.
And as the turbo is slightly at the front of the engine, that pipe may even be to short :/
And as the turbo is slightly at the front of the engine, that pipe may even be to short :/
nicodache
Active Member
Now, if you wanna buy a 2.0l turbo WRX downpipe to fit on a 1.6 turbo levorg... Better try & find a JDM turbo 2.0L Levorg compatible downpipe. that has better chance to fit
From my research the turbo outlet gasket of both is identical which means it should bolt up to the turbo, shape is roughly the same as well. If minor modification (cut/weld) is required no problem, I can deal with that. In theory this downpipe should be very close, FA20 Turbo WRX to go on FB16 Levorg. If anyone has tried it please let me know
nicodache
Active Member
0k, so you're on about fitting a downpipe for a 2.0 turbo WRX onto a 1.6l turbo levorg. That wasn't clear from your first post, I understood you were talking about fitting a 2.0 NA levorg downpipe onto a 1.6 turbo levorg 
