Robsyuk
Active Member
- Joined
- Jun 4, 2022
- Messages
- 395
- Vehicle(s)
- LEVORG Sti
I cleaned my pcv valve, throttle body and intercooler and found I really needed to pull / push the inlet pipe to get it onto the intercooler.
After a faf I managed to get it on, and during a test drive i can hear a whistle and I have no boost. When I let go of the gas, it's like I have a dump valve fitted and get a loud tussshh but have no increase in speed.
I don't have any warning lights or issues with idle or driving.
I feel like the pipe may be slightly off the turbo but it's red hot at the minute so I can't get to it .
I'm sure I've seen another post about a breather being off causing the loud tussh but can't find it.
*fixed it. A clip was loose.
After a faf I managed to get it on, and during a test drive i can hear a whistle and I have no boost. When I let go of the gas, it's like I have a dump valve fitted and get a loud tussshh but have no increase in speed.
I don't have any warning lights or issues with idle or driving.
I feel like the pipe may be slightly off the turbo but it's red hot at the minute so I can't get to it .
I'm sure I've seen another post about a breather being off causing the loud tussh but can't find it.
*fixed it. A clip was loose.
Last edited: